Automate AM2 Guia de Instalação

© 2007 Directed Electronics, Vista, CAN2102A 2007-06Model AM2Installation GuideNOTE: This product is intended for installation by a professional insta

10.©2007 Directed Electronics3. TTrraannssmmiitt.. The transmitter is used to select the desired setting. As shipped,the unit is configured to th

©2007 Directed Electronics11System Features MenusNote: Factory default settings are shown in BOLD.Note: When changing features that have more then 2 o

12.©2007 Directed Electronics1 AACCTTIIVVEE/PASSIVE/AUTO REARM ARMING: When active arming is selected, the system willonly arm when the transmitte

©2007 Directed Electronics1311 SECURITY FEATURES: When selected OOFFFF, the (-) ground-when-armed and ignition sensetrigger will not be active upon l

14.©2007 Directed Electronics2. CChhoooossee..Within 10 seconds, press and release the Valet/program switchthe number of times corresponding to the de

©2007 Directed Electronics15Transmitter ConfigurationsThe transmitters can be programmed with the standard or single button arm/disarm configurationsb

16.©2007 Directed ElectronicsProgramming Master Dealer RemotesFollow the program instructions above and use the Directed part number 465D(master d

©2007 Directed Electronics17Wiring Quick Reference GuideValet/LED SwitchGREEN/BLACK Lock #30 Common OutputWHITE/BLUE (-) 200 mA Channel 3 Validity Out

Code Hopping®, Doubleguard®, ESP®, FailSafe®, Ghost Switch®, Learn Routine™, Nite-Lite®,Nuisance Prevention®Circuitry, NPC®, Revenger®, Silent Mode™,

©2007 Directed Electronics3Table of Contentspprriimmaarryy hhaarrnneessss ((HH11)),, 1122--ppiinn ccoonnnneeccttoorr .. .. .. .. .. .. ..

4.©2007 Directed Electronicsprimary harness (H1), 12-pin connector______________________________________________________H1/1 RED (+)12V constant power

©2007 Directed Electronics5H1/3 BLACK/WHITE-1 DDoommeelliigghhtt SSuuppeerrvviissiioonn/Aux Channel 2 Input (pin 87)This wire determines what the out

6.©2007 Directed ElectronicsH1/11 BLACK (-) Chassis Ground ConnectionConnect this wire to a clean, paint-free sheet metal location (driver kick panel)

©2007 Directed Electronics7H1/14 WHITE/BLUE (-) Channel 3 OutputThis wire provides a (-) 200 mA output whenever the transmitter code controlling Chann

8.©2007 Directed ElectronicsH1/16 ORANGE (-) 500mA Ground-When Armed OutputThis wire supplies a (-) 500mA ground as long as the system is armed. This

©2007 Directed Electronics9Peripheral Plug-In HarnessesIntegrated LED/Valet®®Switch, 2-Pin BLUE PlugThe integrated LED/Valet®switch should be accessib